Clake Levers (Combined Left Hand Rear Brake and Light Clutch) Spares
Clake Cams
Stainless steel cams for tuning the CLAKE One, CLAKE Two and CLAKE Prolever the cams are...
Read More
DOT 4/5.1 Diaphragm
DOT Oil Diaphragm suitable for Clake One, Clake Two, Clake Prolever, One Light Clutch and Clake...
Read More
9.5mm Piston Kit (DOT 4/5.1)
9.5mm Piston Kit (DOT 4/5.1) suitable for Clake One, Clake Two, Clake Prolever, One Light Clutch...
Read More
CLAKE TWO - Brake Lever
CLAKE TWO Brake Level, machined from solid billet 6061 aluminium alloy.
Read More
10mm 45 Degree Banjo Fitting (Goodridge)
10mm 45 Degree Banjo fitting for use with Clake and High Performance SLR lines (Goodridge lines).
Read More
Braktec to Brembo Hose Conversion
Converts your Braktec hose to a standard Brembo style clutch hose for use with all Brembo Master...
Read More
CLAKE - Brake Billet Lid
Clutch Billet Lid used for CLAKE Products, machined from 6061 Aluminium. Note: Fitted standard...
Read More
Mineral Oil Diaphragm
Mineral Oil Diaphragm suitable for Clake One, Clake Two, Clake Prolever, One Light Clutch and...
Read More
10.5mm Piston Kit (Mineral Oil)
10.5mm Piston Kit (Mineral Oil) suitable for Clake One, Clake Two and Clake Prolever. NOTE:...
Read More
Clake Blanking Plate
Clake Blanking Plate for removal of dual control and as an end cover for the Clake bodies....
Read More
8mm Copper Sealing Washers
8mm Copper Sealing washer for use with Clake products and lines.
Read More
CLAKE - Dual Control Kit
All the components to convert a Clake hand control unit to a Dual control unit. This works on...
Read More
6mm Copper Sealing Washers
6mm Copper Sealing washer for use with Clake products and lines.
Read More
CLAKE - Clutch Billet Lid (DOT 4/5.1)
Clutch Billet Lid used for CLAKE Products, machined from 6061 Aluminium. Note: Fitted standard...
Read More
Bleed Seal for Clake
Clake Bleed Seal for use with bleed bolts on all Clake One, Two and Prolever units. Please...
Read More
Clake - Clutch Lever Bearing
Clutch Lever Bearing Clake One, Clake Two and Clake'Prolever models.
Read More
Clake Rocker Main Pivot Pin
The Rocker Pivot Pin for clutch, brake and clutch assist rocker movement, suitable for all Clake...
Read More
Clake - Brake Lever Bearing
Brake Lever Bearing Clake One, Clake Two and Clake'Prolever models.
Read More
Clake - Rocker Arm Bearing
Rocker Arm Bearing for Clake One, Clake Two and Clake'Prolever models.
Read More
Clake Teflon Shield
Square Teflon Shield for Clake One, Clake Two and Clake Prolever models.
Read More
Cam Screw
Cam Screw for fastening Clake One, Clake Two, Clake Prolever'and One Light Clutch cams. Please...
Read More
Clake Teflon Lever Shim
Teflon Lever Shim for Clake One, Clake Two and Clake Prolever models. Please Note: Clake One...
Read More
Clake Teflon Rocker Shim
Teflon Rocker Shim for Clake One, Clake Two and Clake Prolever models.
Read More
Clake Main Lever Pivot Pin
The Main Pivot Pin for lever operation, suitable for all Clake One, Clake Two and Clake Prolever...
Read More
Clake Two - Complete Lever Assembly
Complete Clake Two Lever Set including adjuster assembly & spring, machined from 7000 series...
Read More
Clake Lever Bearing Kit
Clake Lever Bearing Kit; includes Main Lever Bearing, Brake Arm Bearing, Main Pivot Pin and...
Read More
Clake Clutch Activation Switch
Clutch Activation switch that can screw into the end of the blanking plate or dual control slave...
Read More
Clake Prolever - Main Lever
Main lever for the Clake Pro Lever, please note that this is not the Full Lever Assembly which...
Read More
Clake Prolever - Operators Lever
Operators lever for the Clake Pro Lever, please note that this is not the Full Lever Assembly...
Read More
CLAKE TWO - Clutch Lever
CLAKE TWO Clutch Level, machined from solid billet 6061 aluminium alloy.
Read More
Barkbuster Spacer Kit
A Barkbuster spacer kit for use with Clake One, Clake Two and Prolever. Spaces the inside mount...
Read More
"O" Ring Seal for Clake Dual Control Slave Cylinder
"O" Ring for use with the Dual Control Slave Cylinder on Clake One, Two and Prolever Dual...
Read More
10.5mm Piston Kit (DOT 4/5.1)
10.5mm Piston Kit (DOT 4/5.1) suitable for Clake One, Clake Two and Clake Prolever. NOTE:...
Read More
Clake - Overlap Cam Bearing
Overlap Cam Bearing for Clake One, Clake Two and Clake'Prolever models.
Read More
6mm E-Clip
6mm E-Clip used for both Main Pivot Pins in the Clake One, Two and Prolever models. Also used on...
Read More
CLAKE - Clutch Billet Lid (Mineral Oil)
Clutch Billet Lid used for CLAKE Products, machined from 6061 Aluminium. Note: Fitted standard...
Read More
Male-Female M10x1 Hose Adaptor
This adapter is used either to extend the hose slightly or allows the use of Banjo fitting,...
Read More
Reservoir Lid Screw
Reservoir'Lid Screw for fastening Clake One, Clake Two, Clake Prolever'and One Light Clutch...
Read More
Handlebar Clamp
Handlebar Clamp used for all Clake and One Light Clutch Products. Note: Handlebar Clamp comes...
Read More
10mm Copper Sealing Washers
10mm Copper Sealing washer for use with Clake products and lines.
Read More
Longer Clutch Line (1150mm)
A Longer Clutch Line for use with all Clake ONE, TWO, PROLEVER, SLR and One Light Clutch...
Read More